Vinpower Digital Xerox LightScribe Series - Manual (Page 34)

4 Xerox LS Duplicator
Step 7: Once the duplication run is complet-
ed, the successful copies will be ejected and
you shall see the following screen .
“PASS 7” indicates that you’ve just made 7
successful copies.
“FAIL 0” indicates that you have no failure
in this run.
“7” indicates that you’ve successfully
copied 7 copies so far.
Step 8: Remove the successful copies and
refill the trays with additional blank media
to continue making more copies . You can
also press the << button to terminate your
project and go back to the main menu .
If you’ve specified a counter value for your
project and your project is completed, you
shall see the following screen:
•
•
•
PASS 7 FAIL 0( 7)
Waiting for Blanks
Pass 21 Fail 0
Job Completed! Press OK to Finish
You can then press >>to go back to main
menu .
If you have any failed discs
(bad copy) during a run, the
failed disc(s) will not be ejected
automatically. You need to
manually eject them and throw
them away if they are write
once recordable disc(s).
Note