Vinpower Digital Xerox LightScribe Series - Manual (Page 64)

64 Xerox LS Duplicator
your blank recordable media .
To help detect flaws in the master disc
prior to performing the duplication pro-
cess, we introduce the “Prescan” feature .
This feature will scan and detect any bad
sectors existing in the master disc . It is
recommended to perform this feature
before starting the duplication task for
all master discs . By doing so you can pre-
vent wasting blank media due to an error
in the master disc .
15.3 Duplicator Info
By entering this menu, you will be able to
see the hardware and software informa-
tion pertaining to your duplicator .
15.4 Device Info
By entering this menu, you will be able
to see the information for devices built
inside your duplicator, such as the drives .
That information includes but not lim-
ited to manufacture, model number, etc .
15.5 Load Default
This function will reset all of the options
back to manufacture’s default . You can
perform this function if your duplicator is
acting abnormal . You’ll need to perform
“Shutdown” and restart the duplicator in
order for this to take affect .
15.6 Update Firmware
This function will update the software
for your duplicator . To update, you
need to insert a manufacture Certified
Update CD into the Reader and select
this function by pressing the >>button .
We strongly suggest you do not upgrade
your duplicator’s firmware unless your
duplicator is getting unstable .