Vinpower Digital Xerox LightScribe Series - Manual (Page 47)

Xerox LS Duplicator 47
Step 5: Once the speed setting has been suc-
cessfully changed, you shall see the following
screen for 2 seconds .
Then you will be directed back to the main
menu:
Mix Audio Tracks
This process will guide you to mix an Audio
CD from various tracks among different Audio
CDs .
The following are the ways you can mix an
Audio CD:
Mix directly to Blank CD-R media
(This option is not available if you have a
CD+G Duplication Duplicator):
By mixing an audio CD directly to blank
CD-R media, all the tracks you selected
will be transferred to the blank CD-R
media directly track by track . Once you’ve
completed your track selection(s); you will
be instructed to finalize your mixed Audio
CD . You can operate this by choosing “Edit
Track to: Blank CD” when asked .
Mix through the Hard Drive
(This option is available ONLY if your dupli-
cator has a hard drive installed.):
By mixing an audio CD through the Hard
Drive, all the tracks you select will be
transferred to the Hard Drive . Once you’ve
completed your track selection(s); you will
be instructed to copy them onto a blank 80
min CD-R media . You can operate this func-
tion by choosing “Edit Track to: Hard Drive”
when asked .
•
•
CD to CD Speed:
Adjusted to: 24x
DUPLICATOR 2.20
1.Copy
Please do this cautiously; if any
of the Audio CD tracks you wish
to mix are not readable due
to scratches or poor quality,
the blank CD-R media will be
ruined.
This is considered a safer
method to perform the mix au-
dio tracks. If any of the Audio
CD tracks you wish to mix are
not readable due to scratches
or bad quality, the blank CD-R
media will NOT be ruined since
the blank CD-R media isn’t be-
ing recorded on until all Audio
CD tracks are successfully
transferred to the hard drive.
Note
Note