Verilink Productivity 500 (34-00236) Product Manual - Manual (Page 91)

FAXBACK REQUEST FORM #2 500 TA Page 91
request ISDN data service. You should also provide the long distance carrier with the
directory number(s) you will be using.
ISDN SERVICE PROVIDER: The following is a list of ISDN line configu-
ration requirements for the 500 TA. In addition to the basic requirements, the
optional features listed above should also be incorporated into the line setup.
ISDN Physical Line Requirements:
• 2B+D Basic Rate Interface (BRI), 2B1Q U interface (ANSI T1.601)
• NIUF Standard Line Configuration Line Set (NIIG) 11.
ISDN Line Configuration Requirements:
The 500 TA supports the following switch types and versions:
• AT&T 5ESS 5E4.2 and later, Custom or Standard (NI-1)
• Northern Telecom DMS100 BCS-29 and later,
PVC0 - PVC-1 or PVC2 (NI-1)
• Siemens EWSD 10.0 and later NI-1
• Other NI-1 Compliant NI-1
The following bearer capabilities are required:
• Circuit mode voice (circuit switched voice, CSV) service for speech and 3.1 kHz
audio.
• Circuit mode data (circuit switched data, CSV) for 56 kbps and 64 kbps unrestricted
data.
• Simultaneous circuit switched voice (CSV) and circuit switched data (CSD) calls.
AT&T
General:
Line Set (NIIG) 11
B1 Service On Demand (DMD)
B1 Long Distance Access Rate 64 kbps (desired)
B2 Service On Demand (DMD)
B2 Long Distance Access Rate 64 kbps (desired)
Data Line Class Point-to-Point (PP) or Multi-Point (MP)
desired
Maximum
B Channels 2
Circuit Switched Voice (CSV) Bearer Channels - Any
Number of CSV Calls
1
Circuit Switched Voice (CSD) Bearer Channels - Any
Number of CSD Calls
1
Terminal Type A
Hold, Conference, Drop No
Caller ID No
ISDN Line Configuration Request Form #2 Page 2 of 3