Verilink Productivity 500 (34-00236) Product Manual - Manual (Page 35)

LocalMenu Operation 500 TA Page 35
press the SPACEBAR. Use the arrow keys to highlight the desired screen and
press ENTER to complete the selection. In most cases, the Menu region will be
updated with a new set of menu items for manipulation.
If you select RESET MENU in the Option region then the screen will be re-
displayed. If you select EXIT MENU then you will exit LocalMenu and return
to the AT command mode.
Incoming Data Calls
The 500 TA will not answer an incoming data call while you are using Local-
Menu, even if the Auto Answer option is enabled (S0 is not set to 0). This pre-
vents you from unexpectedly being transitioned into the data mode. The 500
TA will, however, notify you of the incoming call by flashing the Call Status
(CS) LED. When this happens, you may answer the data call by exiting Local-
Menu. If the Auto Answer option is enabled, the call will be answered immedi-
ately. If the Auto Answer option is disabled (S0=0), the 500 TA will return to
the AT command mode. The call may then be answered by typing ATA. When
the data call is connected, the connect message will be displayed and the CS
LED will remain on.