Verilink Productivity 500 (34-00236) Product Manual - Manual (Page 49)

Option Configuration 500 TA Page 49
DTE Parity @P3
This command sets the DTE parity. The AT command processor, in most cases,
will detect the DTE speed and parity automatically.
DTE Number of Data Bits @P4
This command sets the number of data bits the PC or terminal uses.
DTE Number of Stop Bits @P6
This command sets the number of stop bits the PC or terminal uses.
800 4800 bps
600 9600 bps
9200 19200 bps
8400 38.4 kbps
8000 48 kbps
6000 56 kbps
7600 57.6 kbps (default)
4000 64 kbps
12000 112 kbps
15200 115.2 kbps
(disables AutoBaud)
28000 128 kbps
Command Operation
No Parity (default)
Odd Parity
Even Parity
Mark Parity
Command Operation
7 data bits
8 data bits (default)
Command Operation
One stop bit (default)
One and one-half stop bits
Two stop bits