Verilink Productivity 500 (34-00236) Product Manual - Manual (Page 63)

Call Placement 500 TA Page 63
Table 4 Normal Status and Connection Messages
Code # Word Message Meaning
0 OK Command received OK.
1 CONNECT Connection made at 0-300 bps; or at any speed
while X command in effect.
2 RING Incoming ring detected.
3 NO CARRIER Valid carrier not detected within period specified
by register S7, or carrier lost for 300 ms or more.
4 ERROR Command not recognized or too long.
5 CONNECT 1200 Connection made at 1200 bps.
6 NO DIALTONE ISDN Link is not synchronized
7 BUSY Dialed number busy
10 CONNECT 2400 Connection made at 2400 bps.
11 CONNECT 4800 Connection made at 4800 bps.
12 CONNECT 9600 Connection made at 9600 bps.
14 CONNECT 19200 Connection made at 19200 bps.
28 CONNECT 38400 Connection made at 38400 bps.
32 CONNECT 48000 Connection made at 48000 bps
17 CONNECT 56000 Connection made at 56000 bps.
18 CONNECT 57600 Connection made at 57600 bps.
19 CONNECT 64000 Connection made at 64000 bps.
57 CARRIER 56000 ISDN Line Speed is 56000.
59 CARRIER 64000 ISDN Line Speed is 64000.
81 PROTOCOL: ISDN Clear Channel Protocol.
83 PROTOCOL: V.120 V.120 Rate Adaption Protocol.
96 CHANNEL B1 Using Channel B1.
97 CHANNEL B2 Using Channel B2.