Verilink Productivity 500 (34-00236) Product Manual - Manual (Page 40)

Page 40 500 TA Option Configuration
DISPLAYING CONFIGURATION AND INFORMATION
The port, switch, and global configuration can be viewed using view com-
mands. This is a convenient way to review the 500 TA configuration without
having to display the value for each individual option.
Display Port Configuration &V
To display the current port configuration use the &V command. This command
is helpful in determining if the 500 TA is configured properly for your PC or
terminal.
Display Global Configuration >V=G
To display the current global configuration options, use the >V=G command.
This will display the switch configuration as well as parameters relating to pro-
visioning. This command is helpful in determining if the 500 TA is configured
properly for the network.
Display DN, SPID, and TEI >V=C
To display the current DN, SPID, and TEI values, use the >V=C command.
This command is helpful in determining if the 500 TA is configured properly
for the network.
Display Product Information
Use the I command to display product information.
Command Operation
&V Display Port Configuration Options (except for V.120 and
stored dial strings)
&V=E Display V.120 Configuration Options
&V=Z Display stored dial strings
Command Operation
I0 Product ID ("960")
I1 ROM checksum
I2 ROM checksum verification
I3 Firmware revision
I4 Numeric capability string
I8 Verbose capability string
I9 Plug-and-Play ID