Verilink Productivity 500 (34-00236) Product Manual - Manual (Page 100)

Page 100 500 TA Appendix D
Factory Profile #1 (Synchronous V.120 Operation) (AT&F1)
NOTE: Shading indicates variation from profile #0.
AT COM OPTION SETTING AT COM OPTION SETTING
E1 Local Echo Enabled &S1 DSR Normal
Q0 Status Messages Enabled &D2 DTR Disconnect
V1 Verbose Messages Q3 RTS/CTS Flow Control
W0 Disable Protocol Messages &M1 Synchronous Mode
X2 All Connect Messages &R0 CTS Follows RTS
S0=1 Autoanswer Enabled %A2=2 V.120 Protocol
S2=43 '+' Escape Character %A4=0 Line Channel Speed 64K
S3=13 Carriage Return Character %A93=D Do Not Answer Speech Call
S4=10 Line Feed Character %A94=D Do Not Answer Audio Call
S5=8 Backspace Character %A95=E Answer Data Call
S7=30 Wait For Connect
30 Seconds %A98=D Originate Call As Data
S10=14 Carrier Fail Detect Time
1.4 Seconds %D0 Disconnect Buffer Delay 0
Seconds
S12=50 +++ Escape Guard Time
1 Second @P1=A AT Commands
S18=0 Test Exit Timer (Disabled) @P2= 9600 DTE Speed = 9600 bps
S25=5 DTR Drop Response Time
0.5 Seconds @P3=N DTE Parity None
S26=1 RTS to CTS Delay Time
(Sync) 0.1 Second @P4=8 DTE Data Bits 8
&C1 DCD Normal @P6=0 DTE Stop Bit 1