Sample applications, Appendix b - sample applications, Appendix b – Verilink C100 (880-502893-001) Product Manual User Manual
Page 95: Appendix

6/15/99
Verilink C100 and C150 T1/FT1 CSU/DSU
B-1
Appendix
B
Sample Applications
This appendix contains sample applications using the C100 and C150.
Each application includes a description, an illustration and an
illustrated table of switch settings.
SW3 is not used in the C100. When using a C150 for an application that
can also be implemented with a C100 or only with a C150, you must
set SW3 switches as indicated in the table for the corresponding
sample application.
The following illustrations describe applications that can be
implemented using either a C100 or C150:
■
Figure B-1, Example: C100/C150 T1 CSU/DSUs connecting two
LANs together over T1/F-T1
■
Table B-2, Switches: C100/150 T-1 CSU/DSU to Connect to a
Frame Relay Service
■
Figure B-3, Using the T-1 C100/C150 CSU/DSUs connecting two
routers in LDM mode
The following illustrations describe applications that can be
implemented using only a C150:
■
Figure B-4, C150 T-1 CSU/DSUs connecting two PBXs over T-1
and converting D4 to ESF
■
Table B-4, Switches: C150 CSU/DSUs connecting PBXs over T-1
and converting D4 to ESF
■
Figure B-5, C150 CSU/DSUs connecting two PBXs and two
routers over a T-1 facility
■
Table B-5, Switches: C150 CSU/DSUs connecting PBXs and
routers over a T-1 facility