Controls, indicators, user interfaces, and ports, Dip-switch and console interfaces, C100 front and rear panels – Verilink C100 (880-502893-001) Product Manual User Manual
Page 15: Figure 1-1, C100 front panel -3

Introduction
06/17/97
C100 and C150 T1/FT1 CSU/DSU
1-3
Controls, indicators, user interfaces, and ports
This sections describes the C100/150 user interfaces, controls and
indicators, and data and network ports.
DIP-switch and
console interfaces
The C100/C150 T-1 CSU/DSU is configured with simple to use DIP
switches. As illustrated in
, color-coded LED indicators
display status and loopbacks simultaneously.
The C100 T-1 CSU/DSU also includes a user-friendly ASCII console
that can be used instead of the DIP switches. Two console connectors
on the rear of the unit permit up to eight units to be multi-drop polled
and controlled by a single console connected either locally or remotely.
The console port supports VT100s and PC terminal emulation mode,
with either a direct or dial-up modem connection.
C100 front and rear
panels
Figure 1-1
C100 front panel
Two push-button switches on the front panel are used to test all local
and remote units.
Push-button switches