Verilink C100 (880-502893-001) Product Manual User Manual
Page 128

C100 and C150 SNMP MIB
D-14
Verilink C100 and C150 T1/FT1 CSU/DSUs
6/15/99
Private Enterprise - Verilink Proprietary CSU-1-MIB
The Verilink CSU-1-MIB is a proprietary MIB used on the C100 and
C150 product. It encompasses the configuration, diagnostic, and
statistic information for a single T1/FT1 CSU/DSU. Although the
C100 and C150 must also support MIB-II manageable elements, this
MIB specifies the singular data elements that apply only to T1/FT1
CSUs. References to dsx1 in RFC1406 apply to the T1 Network
Interface. References to dsx1 in the Verilink proprietary MIB apply to
the T1 Customer Interface (typically a PBX).
The object ID prefix for this proprietary MIB is defined as follows:
1.3.6.1.4.1.2270.w.x.y.z
where:
1
(iso)
3
(org)
6
(dod)
1
(internet)
4
(private)
1
(enterprises)
2270
(Verilink vendor #)
w
(Verilink product code)
There are six possible Verilink product codes:
(1)
C100
(2)
C150
(3)
TL3580
(4)
TL3080
(5)
TL3452
(6)
TL3450
x
(specific group in CSU-1 MIB)
There are three possible groups in the CSU-1 MIB:
sysConfig (x
=
1)
chnConfig
(x = 2)
dsx1Config
(x = 3)
y
(specific variable in group)
z
(state of specific variable in group)