Ds1 current table (x = 7) – Verilink C100 (880-502893-001) Product Manual User Manual
Page 121
C100 and C150 SNMP MIB
6/15/99
Verilink C100 and C150 T1/FT1 CSU/DSUs
D-7
dsx1Fdl Object (dsx1ConfigEntry 13)
This bitmap describes the use of the facilities data link, and is the sum
of the capabilities. The following values are supported:
dsx1Ansi-T1-403
dsx1Att-54016
'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI.
'dsx1Att-54016' refers to ESF FDL exchanges.
DS1 Current Table
(x = 7)
The DS1 current table contains various statistics being collected for the
current 15 minute interval. It consists of 11 read-only entries.
dsx1CurrentIndex Object - (dsx1CurrentEntry 1)
The index value which uniquely identifies the DS1 interface to which
this entry is applicable. The interface identified by a particular value of
this index is the same interface as identified by the same value as a
dsx1LineIndex object instance.
dsx1CurrentESs Object - (dsx1CurrentEntry 2)
The number of Errored Seconds encountered by a DS1 interface in the
current 15 minute interval.
dsx1CurrentSESs Object - (dsx1CurrentEntry 3)
The number of Severely Errored Seconds encountered by a DS1
interface in the current 15 minute interval.
dsx1CurrentSEFSs Object - (dsx1CurrentEntry 4)
The number of Severely Errored Framing Seconds encountered by a
DS1 interface in the current 15 minute interval.
dsx1CurrentUASs Object - (dsx1CurrentEntry 4)
The number of Unavailable Seconds encountered by a DS1 interface in
the current 15 minute interval.