Channel configuration group (chnconfig x=2) – Verilink C100 (880-502893-001) Product Manual User Manual
Page 130
C100 and C150 SNMP MIB
D-16
Verilink C100 and C150 T1/FT1 CSU/DSUs
6/15/99
sysTiming Object (sysConfigEntry 4)
This variable defines the system timing options. The following values
are supported:
Network
DSX1 - C150 only
Internal
Channel
Network (loop timing)
DSX1 (through timing) - C150 only
Internal (local timing)
Channel (through timing)
Channel
Configuration
Group
(chnConfig x=2)
The chnConfig Group consists of six read-write variables:
chnInterface (y = 1)
chnRxsignal (y = 2)
chnData (y = 3)
chnClock (y = 4)
chnTiming (y = 5)
chnBandwidth (y =6)
chnInterface Object (chnConfigEntry 1)
This variable is used to select the interface on the Synchronous
Channel. The following values are supported:
RS530
RS232
V.35
chnRxsignal Object (chnConfigEntry 2)
This variable selects Switched or Continuous Carrier Control. This
works in conjunction with the Request-to-Send (RTS) control signal,
the Carrier Detect (CD or RLSD) control signal and the 56000/64000
DS0 bandwidth selection. The following values are supported:
Continuous
Switched