Verilink C100 (880-502893-001) Product Manual - Manual (Page 35)

Configuration Using the DIP Switches
06/17/97 C100 and C150 T1/FT1 CSU/DSU 3-11
56000 or 64000 Switch pack 4 position 4 determines whether the bandwidth of all DS-
0s to the Synchronous Channel is 56000 or 64000 bps. With position 4
Off all DS-0s to the Synchronous Channel are 56000 bps. To calculate
the Channel speed, multiply 56000 times the number of DS0s going to
the Channel. If 4 DS-0s were selected to go to the Synchronous
Channel, the Channel speed would be 224000 bps.
Setting position 4 to On gives 64000 bps to all the selected DS0s going
to the Channel. The same calculation applies when using 64000 bps.
Multiply 64000 times the selected DS-0s to calculate Channel speed.
The following chart lists all the multiples of 56000 and 64000 bps
available with the C100/C150 T-1 CSU/DSU. This option must be set
the same in both units.
Table 3-5 Number of 56000 or 64000 DS0s selected
Numbers of Multiplied Multiplied
DS0's selected by 56000 by 64000
1 56000 64000
2 112000 128000
3 168000 192000
4 224000 256000
5 280000 320000
6 336000 384000
7 392000 448000
8 448000 512000
9 504000 576000
10 560000 640000
11 616000 704000
12 672000 768000
13 728000 832000
14 784000 896000
15 840000 960000
16 896000 1024000
17 952000 1088000
18 1008000 1152000
19 1064000 1216000
20 1120000 1280000
21 1176000 1344000
22 1232000 1408000
23 1288000 1472000
24 1344000 1536000