Verilink C100 (880-502893-001) Product Manual - Manual (Page 73)

Chapter
6/15/99 Verilink C100 and C150 T1/FT1 CSU/DSU 7-1
7
Configuring the Console Port for SNMP
This chapter describes using the Consol and the front panel switches
to enable SNMP and set the IP address for SNMP communication.
Navigating the
menu tree To display any of the five screens listed in the Main Menu, advance the
blinking cursor to the left of the selection wanted and press the ENTE
key.
Figure 7-1 Main Menu with Console Activated
29 APR 1997 VERILINK CORPORATION 15:17:55
UNIT ADDRESS 1 T-1 CSU/DSU CONSOLE
Main Menu
Configuration
Local Registers
Diagnostics & Statistics
Service
Utilities
Deactivate Console
Software: REV 3.01
CONSOLE ACTIVATED
CURSOR FORWARD = [SPACE] SELECT = [ENTER] CURSOR BACK = [B]