C100 and c150 specifications, Network interface (ni), Customer interface (ci) – Verilink C100 (880-502893-001) Product Manual User Manual
Page 89: Appendix a - c100 and c150 specifications

6/15/99
Verilink C100 and C150 T1/FT1 CSU/DSU
A-1
Appendix
A
C100 and C150 Specifications
This appendix contains technical specifications for the C100 and C150.
Specifications apply to both unless otherwise specified.
Network Interface
(NI)
Line Rate
1.544 Mbps + or - 50 ppm
Line Format
Bipolar AMI or B8ZS
Pulse Characteristics
AT&T 62411, T1.403 & Part 68 compliant
Impedance
100 ohms, input and output
Line Build Out (LBO)
0, -7.5, -15, or -22.5 dB
Elastic Store
1 frame ± 1 frame
Interface Termination
8-Position RJ48C
Timing Source
Network, Internal, CI Channel
C150 only: CI DSX-1
LDM Mode
Will drive up to 6000 feet when used as
LDM
C150 only
DSX-1 signal input level of customer interface:
minimum of -22 dB
Customer Interface
(CI)
Rate: sync channel
up to 1.536 Mbps and any combination of
56K or 64K bps
Rate: DSX-1 channel
(C150 only) 1.544 Mbps +/- 50 ppm
Interfaces (Sync Channel)
Electrical: CCITT V.35
EIA RS422/RS530
EIA RS232