Thermon TraceNet TCM 18 User Manual

Page 2

TCM18 Panel Installation, Start-Up, Operating and
Maintenance Guide

This guide, as well as the firmware described in it, is furnished under license and may only be used
or copied in accordance with the terms of such license. The information in this guide is furnished
for informational use only, is subject to change without notice, and should not be construed as a
commitment by Thermon Manufacturing Company. Thermon Manufacturing Company assumes no
responsibility or liability for any errors or inaccuracies that may appear in this guide.

This information is subject to change without notice. It is recommended that a quick check of the
current revision status be done at

www.Thermon.com

prior to proceeding.

This guide is written and designed at Thermon Manufacturing Company
100 Thermon Drive, San Marcos, TX 78667-0609, USA.

PRODUCT WARRANTY INFORMATION

The seller warrants all equipment manufactured by it to be free from defects in workmanship or mate-
rial under normal use and service. If any part of the equipment proves to be defective in workmanship
or material and if such part is, within 12 months of the date of shipment from sellers factory, and if the
same is found by the seller to be defective in workmanship or material, it will be replaced or repaired,
free of charge, F.O.B. the seller’s factory. The seller assumes no liability for the use or misuse by the
buyer, his employees, or others. A defect within the meaning of this warranty in any part of any piece
of equipment shall not, when such part is capable of being renewed, repaired, or replaced, operate
to condemn such piece of equipment. This warranty is in lieu of all other warranties (including without
limiting the generality of the foregoing warranties of merchantability and fitness for a particular pur-
pose), guarantees, obligations, or liabilities expressed or implied by the seller or its representatives
and by statue or rule of the law.

PN 50316_0514