Teletronics EZMesh - Manual (Page 42)

User Guide - EZMesh Full Duplex Mesh Network Access Point
Note: You can manually or automatically program the four data encryptions to be identical
on all PCs and access points in your network.
Step 4. To automatically program the data encryption, Enter a Passphrase in the
Passphrase field and Click “Generate” to generate the WEP key.
There will be four sets of WEP Keys generated from the Passphrase. You could choose any
set of the WEP Keys from the Index by selecting the radio button of the Key Index.
Note: It is important to remember the WEP key. This key needs to be applied for both
MeshAP units on the mesh network and for the client devices that need to access the mesh
network.
Step 5. Click “Save Settings and Apply” to apply the new setting.
TELETRONICS INTERNATIONAL, INC. - 38 -