Teletronics EZMesh - Manual (Page 26)

User Guide - EZMesh Full Duplex Mesh Network Access Point
Chapter 7
Station Configuration
Mesh Link Connection Mode
There are two modes available for the MeshAP Station, Auto and Manual.
Auto Mode – The MeshAP Station automatically determines which MeshAP to form an
upstream link, or uplink, with. The POP algorithm uses the Bandwidth Score to make this
determination.
Manual Mode – The upstream link, or uplink, is selected from the Site Survey page on the
MeshAP Station. From the Site Survey page, it possible to select one or more MeshAP
devices to be the uplink.
Setup Station in Auto Mode
IMPORTANT: To access a MeshAP Station unit on the mesh network, you need to
access the MeshAP Mesh Manager unit fist and then you could access the
MeshAP station from the Topology page.
(See Chapter 5 for more detail information)
Step 1. Login to the MeshAP Access Point.
Step 2. Go to Setup page.
TELETRONICS INTERNATIONAL, INC. - 22 -