Teletronics EZMesh - Manual (Page 20)

User Guide - EZMesh Full Duplex Mesh Network Access Point
Note: The SSID for Client AP(802.11b/g), “arrow”, is reserved for a MeshAP Station that
has not associated with(or formed an uplink) with any MeshAP network.
The SSID for Backhaul Radio, “span”, is reserved for a MeshAP Station that has
not associated with(or formed an uplink) with any MeshAP network.
This can prevent end users from accidentally connecting to APs that are not part of a
mesh network. They will not get internet access when they connect to APs that are not
part of a mesh network.
Step 2. Change the PC IP address to 192.168.1.XXX Subnet mask: 255.255.255.0
Step 3. Access the MeshAP via Wireless LAN
Make sure the PC is connected to the SSID: MeshAP (The default SSID for MeshAP)
Note: Please review the Hardware installation Guide for more information.
Step 4. Open a Web Browser and type 192.168.1.8 to access the MeshAP Access Point.
Step 5. User Name: admin
Password: admin
Click "OK
TELETRONICS INTERNATIONAL, INC. - 16 -