Setup mesh wireless (backhaul), Chapter 9 – Teletronics EZMesh User Manual

Page 33

User Guide - EZMesh Full Duplex Mesh Network Access Point

Chapter 9

Setup Mesh Wireless (Backhaul)

Step 1. Login to the MeshAP Access Point.

Note: To access a MeshAP Access Point on the mesh network, login to the Mesh Manager

unit, and access the Topology page to locate the MeshAP Access Point unit needing

configuration.

Step 2. Go to the Wireless page under the MESH section.

Step 3. Select the Auto Assign or User Assign for the wireless backhaul

Note: the Channels shown on the interface may vary base on country of regulation.
The image captured above is based on the US version.

TELETRONICS INTERNATIONAL, INC.

- 29 -