Teac DR-22WL Reference Manual - Manual (Page 31)

TASCAM DR-22WL
31
7– Useful functions
7. Press the F4 button to finalize the setting and return to
the item setting item status.
8. Repeat the 5.-7. steps as necessary.
9. When setting is completed, press the /MENU/8 button.
CAUTION
Reverb function will not work (but able to make settings)
when the setting or the selected playback file’s sampling
rate is 96kHz.
NOTE
The reverb function on/off setting is available also in
recording standby mode; press F4
button and make
setting in the
REVERB
page of the input setting screen.
Reverb pre-set list
Pre-set name Effect
HALL 1 (default value) A bright effect, like a spacious hall
HALL 2
A warm effect, like a spacious hall
ROOM Small room effect
STUDIO Studio effect
PLATE 1 Bright plate reverb
PLATE 2 Warm plate reverb
Metronome function (compatible with
V1.10)
The DR-22WL has a built-in metronome, useful for practicing
musical instruments.
1. Press the /MENU/8 button to display the
REC page in
menu screen.
2. Use the F1 button to display the
TOOL
page.
3. Use the F2 and F3 buttons to select (highlight) the
METRONOME
item and press the F4 button.
The METRONOME screen is displayed.
4. The following settings are available in the
METRONOME
screen:
TEMPO
Set speed between
20
-
250
(BPM).
(default value:
120
)
BEAT
Set beat between
0
-
9
. (default value:
4
)
This will accent the first beat.
SOUND
Set beat between
1
-
2
. (default value:
1
)
LEVEL:
Set the metronome volume
0
-
10
.
(default value:
5
)
5. Use the F2 and the F3 buttons to select (highlight)
the setting parameter and press the F4 button.
6. Use the F2 and F3 buttons to set the desired option/
value.
7. Press the F4 button to finalize the setting and return to
the item setting item status.
8. Repeat the 5.-7. steps as necessary.
9. Press the play button to start the metronome.
Press the /MENU/8 button to stop the metronome.
10. Press the /MENU/8 button again to close the metronome
function.