Teac DR-22WL Reference Manual - Manual (Page 30)

30
TASCAM DR-22WL
7– Useful functions
Dividing the selected file (DIVIDE)
A recorded file can be divided into two at a desired position.
1. Use the . button, the / button, or the browse screen
to select the file you want to divide.
2. Press the /MENU/8 button to display the REC page in
menu screen.
3. Use the F1 button to display the TOOL page.
4. Use the F2 and F3 buttons to select (highlight) the
parameter in
DIVIDE
item and press the F4 button.
The DIVIDE screen is displayed.
5. Use the F2 and F3 buttons to finalize the dividing
section, and press the F4 button to finalize the setting.
The following pop-up window appears.
6. Press the F3 button to divide the file.
If you press the F2 button, the file will not divide and
return to the DIVIDE screen.
NOTE
• You can also decide the dividing section in playback mode
by pressing the PLAY button.
• In browse screen, press the PLAY button to switch between
playback and pause. Press the . button to go to the
beginning of the file, or press the / button to go to the
end of the file. To make a fine adjustment of the dividing
point, press together the F2
and the F3 button.
Long-press these buttons for sequential movement.
• When a file is divided, names will be created ending with
either
a
or
b
.
(Example)
File name before division
140826_0001.wav
File name after division
140826_0001a.wav (before the dividing point)
140826_0001b.wav (after the dividing point)
CAUTION
• MP3 files cannot be divided.
• Division may not be available when microSD card does not
have sufficient capacity.
• File name with more than two hundred characters cannot
be divided.
• File cannot be divided when there is a file name identical to
that of the post-divided file.
TIPS
You can add cue marks during recording at the position you
want to divide. (See “Create cue marks during recording” on
page 23.)
Reverb function
The DR-22WL has a built-in reverb function to record and
playback with reverb.
When reverb function is ON, the
icon will appear at the top
of the home screen.
Setting the reverb function
1. Press the /MENU/8 button to display the REC page in
menu screen.
2. Use the F1 button to display the TOOL page.
3. Use the F2 and F3 buttons to select (highlight) the
parameter in
REVERB
item and press the F4 button.
The REVERB screen is displayed.
NOTE
You can set and adjust reverb in record standby mode as
well, from the
REVERB page of the input setting screen.
4. The following settings are made in the REVERB screen.
REVERB:
Set the reverb on/off status (default value:
OFF
).
TYPE:
See the reverb type from the pre-set items. See 31
Reverb pre-set list for more details on reverb pre-set
items.
LEVEL:
You can change the reverb output level selected in the
TYPE item. Settings can be selected from 0 - 100 .
(default value:
70
)
MODE:
Set the reverb mode.
MODE (options) Icon Detail
MONITOR (default value) Reverb state
REC SEND state
5. Use the F2 and the F3 buttons to select (highlight)
the setting parameter and press the F4 button.
6. Use the F2 and F3 buttons to set the desired option/
value.