Teac DR-22WL Reference Manual - Manual (Page 20)

20
TASCAM DR-22WL
4 – Recording
Switching files during recording
(track increment)
During recording, you can switch to a new recording file either
manually or at a set time, and continue to make recording in the
new file. (Track increment function)
Manual track increment during recording
During recording, you can easily update a file manually and
continue to make recording.
1. During recording, press the F1
button.
NOTE
Numbers at the end of file name will increment each time
when a new file is created.
CAUTION
• The maximum total number of folders and files you can
create is 5,000.
• Files with a recording time of less than two seconds cannot
be created.
• The number of the new file will increment if its name is the
same as the existing file.
• Track increment function is not available during
overdubbing.
Automatic track increment at specified time
During recording, the DR-22WL will automatically switch
recording from the current file to a new file when it reaches
a certain time specified in the
TRACK INC of the AUTO
FUNCTION screen.
Follow the below steps to set the maximum time for automatic
increment:
1. Press the /MENU/8 button to display the
REC page in
menu screen.
2. Use the F2 and the F3 buttons to select (highlight)
the parameter of the
AUTO FUNC
item and press the F4
button.
AUTO FUNCTION
screen is displayed.
3. Use the F2 and the F3 buttons to select (highlight)
the parameter of the TRACK INC item and press the F4
button.
4. Use the F2 and the F3 buttons to select the
automatic track increment time.
Options:
OFF
(default value),
5min
,
10min
,
15min
,
30min , 60min
5. Press the F4 button to finalize the selected time.
6. When setting is completed, press the /MENU/8 button to
return to the home screen.
CAUTION
The maximum total number of folders and files you can
create is 5,000.
Automatic recording (AUTO REC)
This function automatically start and pause recordings, update
files, or add cue marks according to the input sound level.
1. Press the /MENU/8 button to display the
REC page in
menu screen.
2. Use the F2 and the F3 buttons to select (highlight)
the parameter of the
AUTO FUNC
item and press the F4
button.
AUTO FUNCTION
screen is displayed.
3. Use the F2 and the F3 buttons to select (highlight)
the parameter of the
AUTO REC
item and press the F4
button.
4. Use the F2 and F3 buttons to select a level that
activates the AUTO REC function (a level that recognize
incoming signal).
Options:
OFF (default value), -6dB , -12dB , -24dB ,
-48dB
5. Press the F4 button to finalize the selected level that
activates the AUTO REC function.
6. Press the /MENU/8 button to return to the home screen.
7. Press the RECORD button to set the recording standby
mode.
The level meter will display sounds within the level that
activates the AUTO REC function and the
icon will
appear on the right side of the recorder status display.
Recording starts automatically when the input signal
exceeds the threshold set in the
LEVEL item.
NOTE
• In standby mode, the REC indicator will flash faster than in
the recording mode.
• When the input sound is below the threshold level set in the
LEVEL item for five seconds or longer, the unit will go
into standby mode and resumes recording when the input
sound exceeds the threshold level.