Teac DR-22WL Reference Manual - Manual (Page 22)

22
TASCAM DR-22WL
4 – Recording
Recording in two formats
(DUAL FORMAT REC)
The DR-22WL can transfer files to a smart phone via Wi-Fi. (See
“Connect the DR-22WL and smart phone via Wi-Fi” on page
33.)
WAV/BWF delivers a high-quality sound but unfit to transfer via
Wi-Fi due to its large file size. The DR-22WL can make
simultaneous recordings in WAV/BWF format and MP3 format
(smaller file size) for Wi-Fi transfer.
1. Press the /MENU/8 button to display the
REC
page in
menu screen.
2. Use the F2 and F3 buttons to select (highlight) the
parameter in DUAL FORMAT item and press the F4
button.
Open the parameter list for the
DUAL FORMAT item.
3. Use the F2 and F3 buttons to select (highlight) the
file type.
Options:
OFF (default value), 32k , 64k , 96k , 128k ,
192k
,
256k
,
320k
4. Press the F4 button to finalize the setting and return to
the item selection mode.
NOTE
DUAL FORMAT recording is available only in WAV 16bit/BWF
16bit with sampling rate of 44.1k/48kHz formats.
Mixing the input sound to the
playback for recording (overdubbing)
The DR-22WL can mix the input sound while playing the
recorded track to create a new file.
The unit offers two overdubbing modes.
8
OVERDUB
This mode mixes the input sound to the playback file.
Users can monitor with a headphone and overdub the sounds.
8 AIRDUB
This mode records group singing or musical performance with
the accompaniment music playback (similar to karaoke).
This mode can output only the playback sound from the output
jack, so users can connect the unit to an external monitor
system and record a new sound source to the playback file.
NOTE
• Speaker will not emit sound in overdubbing mode.
• Pause will not work in overdubbing mode (RECORD button
is disabled).
• The overdubbed file is created in playback format
regardless of the recording format setting.
• Overdubbing will not work when the PRE REC function is
ON. PRE REC function is disabled during overdubbing.
Select files for overdubbing with an input
sound
Select the file for overdubbing with either the .// button
or in browse screen.
NOTE
Please refer to the 5 – Operating files and folders (browse
screen) 26 for selecting files in browse screen.
Start overdubbing
1. In home screen, set the scene dial to .
The OVERDUB screen is displayed and the input sound is
recorded.
NOTE
In pause or playback mode, when you set the scene dial to
, the DR-22WL will make a force stop and display the
OVERDUB
screen.