Teac CG-2000 - Manual (Page 6)

6
TASCAM CG-2000
1 – Introduction
Thank you very much for purchasing a TASCAM CG-2000 Master
Clock Generator.
Before using this unit, please read this manual thoroughly to
ensure you understand how to operate it correctly. We hope
that you will enjoy using this unit for many years.
After you have finished reading this Owner’s Manual, please
keep it in a convenient place for future reference. You can also
download a copy of this manual from the TEAC Global Site
(http://teac-global.com/).
Features
• Supports power redundancy with two power circuits (This
is off by default; turn on to use. See “Setting the power
redundancy function” on page 26.)
• Supports video clock and word clock redundancy (This is
off by default; turn on to use. See“Setting the reference
redundancy function” on page 19.)
• Internal oscillation element uses a high-precision OCXO
(oven-controlled crystal oscillator), which is not affected by
environmental temperature
• Creating systems with even higher precision is possible
using an external input connector that supports 10MHz
• Jitter management circuit provide stable clock
• Glitch-free relocking circuit prevents noise and skipping
during clock dropouts and recovery
• Numerous output connectors, including 12 word clock
outputs, enable use even in large-scale video/audio
synchronization systems
• Supports input and output of a variety of video signal
formats, including NTSC, PAL and HD tri-level
• AES3 and AES11 signals can also be used for external
master clock input sources
• Analyze function can measure output device termination
• Word clock output level adjustment function allows signals
to be provided to other devices at optimal levels
• Error status can be output using GPO parallel output,
allowing the monitoring of problems when they occur
• Self-calibration function using an external oscillator
(atomic/GPS 10MHz, GPS PPS)*
• Word clock up to 192 kHz supported
• Supports 0.1% PULL UP/DOWN between 24F (Film) and 29.97F
(NTSC) and 4% PULL UP/DOWN between 24F (Film) and 25F
(PAL)
• Up to 4 system settings can be saved to buttons for recall,
and saved settings can be imported and exported via USB
• Tough nut-coupling BNC connectors made by Amphenol
• Construction uses independent circuit boards for each
connector to prevent contact failures due to twisting
• Three-prong inlet type power cable included
• Panel-lock switch to prevent misoperation
• 128x64-pixel organic EL display with a wide viewing angle
• Aluminum front panel that matches other studio
equipment
• Firmware updates possible using the USB port
• EIA 1U rackmount size
• RoHS-compliant
*Use of the self-calibration function requires preparation of
a separate PPS-output 10MHz oscillator with a built-in GPS
antenna.
Included items
This product includes the following items.
When opening the package, be careful to prevent damaging the
items. Keep the box and packing materials for transportation in
the future.
Please contact TASCAM if any of these items are missing or have
been damaged during transportation.
• Main unit ..............................................................................................× 1
• Power cord ...........................................................................................× 2
• Euroblock connectors ......................................................................× 2
• Rackmount screw kit ........................................................................× 1
• Owner’s manual (this document) ................................................× 1
The warranty is included at the end of this manual.
Conventions used in this manual
The following conventions are used in this manual.
• Buttons, connectors and other physical parts of this unit are
written using a bold font like this: MENU button.
• Text displayed on the display of the unit appears like this:
REFERENCE .
• The location highlighted (light on dark) on the display is
referred to as the “cursor” in some cases.
• The sampling frequency used for the audio clock is called
the "audio clock frequency".
• Additional information is provided as necessary in tips,
notes and cautions
TIP
These are tips about how to use the unit.
NOTE
These include additional explanations and special cases.
CAUTION
Failure to follow these instructions could result in injury,
equipment damage or lost data, for example.
Trademarks
• TASCAM is a trademark of TEAC Corporation, registered in
the U.S. and other countries.
• Other company names, product names and logos in this
document are the trademarks or registered trademarks of
their respective owners.