Teac CG-2000 - Manual (Page 28)

28
TASCAM CG-2000
9 – Other functions
2. Press the MULTI JOG dial to open the VERSION screen.
The VERSION screen shows information about the
firmware version and build number.
3. Press the EXIT/CANCEL button to return to the menu
screen.
NOTE
When the
VERSION
screen is open during step 2 above,
press the MULTI JOG dial to switch to firmware updating.
For the latest information about updating firmware, visit
the TEAC Global Site (http://teac-global.com/).
Checking the error log
Follow these procedures to check the error log, which contains
information about past errors.
Check the error log from the
LOG page.
1. Press the MENU button repeatedly to open the
LOG
page
menu, and turn the MULTI JOG dial to select the
ERROR
LOG
item.
2. Press the MULTI JOG dial to open the ERROR LOG screen.
In the error log, each error is shown on a separate page.
Error log page example
1 Error log number
These numbers are assigned to errors in order as they are
added to the log.
2 Error date and time
This shows when the error was added to the log.
3 Error summary
This shows the error code and signal affected as described
in the Overview of error codes table. (See “Overview of error
codes” on page 11.)
4 Signal that error affected
This shows the signal that the error affected.
5 Error result
This shows what happened because of the error.
6 Recovery date and time
This shows when the unit recovered from the error.
7 Recovery summary
This shows how the unit recovered from the error.
8 Recovery result
This shows what happened when the unit recovered.
Default setting values list
The factory menu defaults and preset values are as follows.
Menu page Menu item Default Preset
REFERENCE
SELECT INTERNAL ✓
REDUNDANT OFF ✓
RED. SEQ. PREF. PRI. ✓
SECONDARY *1 ✓
FORCE RELOCK OFF ✓
VIDEO CLOCK
FORMAT NTSC ✓
FRAME RATE 29.97 (*2) ✓
AUTO RATE OFF ✓
AUDIO CLOCK
SAMPLE 48kHz ✓
PULL UP/DOWN 0.0% ✓
AUTO RATE OFF ✓
WORD 11/12 x1 ✓
AES AES3 ✓
S/PDIF S/PDIF ✓
TERMINATION
VIDEO A 75ohm ✓
VIDEO B 75ohm ✓
WORD A 75ohm ✓
WORD B 75ohm ✓
GPS 50ohm ✓
WORD OUT LEVEL
1/2 2.5V ✓
3/4 2.5V ✓
5/6 2.5V ✓
7/8 2.5V ✓
9/10 2.5V ✓
11/12 2.5V ✓
UTILITY 1
POWER RED. OFF ✓
BRIGHTNESS 7 ✓
STARTUP LAST(*3) –
✓ : Saved in preset
– : Not saved in preset
*1: The default and preset values are different for each reference
clock.
Reference clock Secondary reference clock
INTERNAL -
VIDEO A VIDEO B
VIDEO B -
WORD A WORD B
WORD B -
AES WORD B
*2: The default and preset values of the
FRAME RATE
item
are different for each video format.
Video format Video frame rate
NTSC 29.97
PAL 25
1080i / 1080Psf 29.97
1080P / 720P 59.94
*3: This will not be restored to the factory default even if the
FACTORY PRESET
item is executed.