Teac SS-CDR1 - Manual (Page 73)

11 − CD-RW management
TASCAM SS-RCD1
73
Refreshing a disc (complete erasure)
7. Once again press the front panel MULTI JOG dial
(or the remote’s ENTER key).
Track erasure will begin.
While the operation is being executed, the screen will
indicate
ERASE
- and a progress bar will be displayed.
When track erasure is complete, you will return to the
CD MENU screen.
NOTE
When you execute the track erase operation on a •
disc that has already been finalized, the SS-CDR1
will unfinalize the disc before erasing the specified
track(s).
This operation can be executed only on a disc that
•
was recorded as CD-DA.
Erasing a disc
Here is how to erase an entire CD-RW disc.
1. Press the MENU key to access the main MENU list
screen.
2. Highlight the CD MENU, and press the front
panel MULTI JOG dial (or the remote’s ENTER
key).
3. Highlight the ERASE item, and press the front
panel MULTI JOG dial (or the remote’s ENTER
key).
A popup window will appear, allowing you to select an
item.
4. Turn the front panel MULTI JOG dial (or use the
remote’s cursor
§ , ¶ keys) to make the popup
window show
Erase Media
, and press the front
panel MULTI JOG dial (or the remote’s ENTER
key).
A confirmation screen will appear.
5. Once again press the front panel MULTI JOG dial
(or the remote’s ENTER key).
Disc erasure will begin.
While the operation is being executed, the screen will
indicate
ERASE
“ and a progress bar will be displayed.
When disc erasure is complete, you will return to the
CD MENU screen.
You can refresh (completely erase) a CD-RW disc.
In some cases, the SS-CDR1 will be unable to recognize a
disc for which finalization was forcibly interrupted (such
as if a power failure occurred during the operation) or a
disc that has been used by a computer. In such cases,
refreshing the disc as follows may make it recognizable by
the SS-CDR1.
1. Press the MENU key to access the main MENU list
screen.
2. Highlight the CD MENU, and press the front
panel MULTI JOG dial (or the remote’s ENTER
key).
3. Highlight the ERASE item, and press the front
panel MULTI JOG dial (or the remote’s ENTER
key).
A popup MENU will appear.
4. Highlight the REFRESH item, and press the
front panel MULTI JOG dial (or the remote’s
ENTER key).
A confirmation screen will appear.
5. Once again, press the front panel MULTI JOG dial
(or the remote’s ENTER key).
The disc refresh operation will begin.
While the operation is being executed, the screen will indi-
cate
REFRESH
- and a progress bar will be displayed.
When the disc refresh operation has been completed,
you will return to the CD MENU screen.