Teac SS-CDR1 - Manual (Page 70)

10 − Copying files between CD and CF card
70
TASCAM SS-CDR1
Here is how to copy MP3 or WAV files from a data CD in
their existing format to a CF card.
The following procedure assumes that the CD is selected
as the current device and that the CF card which includes
the copy-source files and the CD which is the target of the
copy are inserted in the SS-CDR1.
1. Press the
MENU key to access the main menu list
screen.
2. Highlight the CD menu, and press the front panel
MULTI JOG dial (or the remote’s ENTER key).
3. Highlight the RIP TO CF item, and press the front
panel MULTI JOG dial (or the remote’s ENTER key).
The SS-CDR1 will automatically read the CF card.
While the data is being read, the screen will indicate
MEDIA READ
and a progress bar popup will appear.
When reading is completed, a CD folder finder screen
like the following will appear.
NOTE
If a CF card is not inserted,
CF READ
popup will
appear after
MEDIA READ
indication.
4. Select the file (source file) that you want to copy.
As described in “Navigating in the folder finder” on
page 50, move within the finder to select the desired
folder or file. If you select a folder, all files in that fold-
er will be the source.
If you want to select more than one folder or file, repeat
the step of highlighting the desired folder or file and
pressing the CALL key. A check mark will be added to
the selected folder or file. You can make multiple selec-
tions only for folders or files in a single folder.
To de-select a selected folder or file, press the
CALL key
once again.
NOTE
You can select multiple files only within the same •
folder, so once you use the CALL key to select the
first folder or file, you will no longer be able to
move to a different folder.
If you are only selecting one folder or file, there is
•
no need to press the CALL key. Simply highlight the
desired folder or file, and proceed to step 5.
5. When you have selected all of the files to be copied,
hold down the front panel MULTI JOG dial (or the
remote’s ENTER key) to confirm your selection.
When you confirm your selection, the folder finder
screen for the CF card will appear. In this screen you
can select the writing-destination.
If you have selected copy-source files that would
exceed the free space on the CF card or if the number
of source tracks exceeds the allowable number of files
on the CF card, a popup indicating
CAPACITY OVER
or
TRACK OVER
will appear, and you will not be able
to finish the source selection.
In this case, press the
STOP key to close the popup,
decrease the total size or number of the source files,
and then once again hold down the front panel MULTI
JOG dial (or the remote’s ENTER key).
6. Select the copy-destination (target).
As described in “Navigating in the folder finder screen”
on page 50, navigate within the finder to select the
desired folder or file.
The folder or files will be written following the folder
or file you select.
Copy-source folders or
files are added here.
Cursor
The screen before copying.
Copying files from a data CD
10. Once again press the front panel MULTI JOG dial (or
the remote’s ENTER key).
Writing will begin.
While the operation is executing, the screen will indi-
cate
RIP
and a progress bar popup will appear.
When writing is completed, you will return to the CD
menu screen.