Teac DM-4800 Effect List - Manual (Page 9)

Effect parameter list
TASCAM DM-4800 Effect list
Parameter Indicator Range Description Remarks
Cross feedback
amount Fbk X-Feed 0% - 100% (1% steps) Specifies amount of L (R)
channel feedback signal
sent to R (L) channel
feedback path.
Output wet
cross feed Wet X-Feed 0% - 100% (1% steps) Specifies pan for L/R wet
channel outputs. With 0%, L channel wet
signal is output from L
channel, and R channel
wet signal is output
from R channel. With
100%, L channel wet
signal is output from R
channel and R channel
wet signal is output
from L channel.
Mixture Mixture 0% - 100% (1% steps) Specifies mix ratio of
dry feedback delay sig-
nal and LFO modulation
signal.
COMPRESSOR FX2.0
This stereo compressor features feed forward and feedback types, and RMS and Peak level detect
modes.
Table 1.5: Stereo Compressor parameters
Parameter Indicator Range Description Remarks
Attack time Attack 0 ms - 125 ms (1 ms steps) Specifies time taken for
compression to be ap-
plied after input signal
level exceeds user-
defined threshold.
Release time Release 5 ms - 5000 ms (1 ms steps) Specifies time taken
for compression to be
released after input sig-
nal level reaches below
user-defined threshold.
Compression
ratio Ratio 1:1 - 1:infinity Specifies ratio of com-
pression applied to in-
put signal that exceeds
user-defined threshold.
Threshold Threshold –40.0 dB - 0.0 dB (0.1 dB steps) Specifies signal level
that triggers compres-
sor.
Compressor
type CompType FeedForward, FeedBack Specifies type of com-
pressor. With FeedFor-
ward, signal that passed
level detector is com-
pressed. With FeedBack,
signal before level
detector is compressed. With FeedBack, com-
pression will be applied
lightly.