Teac DM-4800 Effect List - Manual (Page 16)

Effect parameter list
1
TASCAM DM-4800 Effect list
Parameter Indicator Range Description Remarks
Pre high filter
gain Pre High –15 dB - +15 dB (0.1 dB steps) Specifies pre high filter
gain.
Post EQ type PostEq Type Parametric, Shelving, Stack, StackOffAxis,
Combo, ComboOffAxis Selects a preset com-
bination of post-filter
frequency and Q.
Post low filter
gain Post Low –15 dB - +15 dB (0.1 dB steps) Specifies post low filter
gain.
Post low-mid
filter gain Post LowMid –15 dB - +15 dB (0.1 dB steps) Specifies post low-mid
filter gain.
Post mid filter
gain Post Mid –15 dB - +15 dB (0.1 dB steps) Specifies post mid filter
gain.
Post high-mid
filter gain Post HiMid –15 dB - +15 dB (0.1 dB steps) Specifies post high-mid
filter gain.
Post high filter
gain Post Hi –15 dB - +15 dB (0.1 dB steps) Specifies post high filter
gain.
EXCITER FX2.0
The exciter effect features a high-performance har-
monic generator.
Table 1.10: Exciter parameters
Parameter Indicator Range Description Remarks
Crossover
frequency Crossover 500 Hz - 10.00 kHz (10 Hz steps) Specifies crossover
frequency of filter that
affects audio signal sent
to harmonic generator. Harmonics will be
generated based on the
frequency range above
the crossover frequency.
Harmonics gain Harmonic
Gain
0% - 100% (1% steps) Specifies gain of har-
monics generated
before they are mixed
with dry audio signals.
Harmonics
balance HarmonicBal 0% - 100% (1% steps) Sets balance between
harmonics of frequency
components below and
above crossover points.