Teac DM-4800 Effect List - Manual (Page 13)

Effect parameter list
TASCAM DM-4800 Effect list
1
Parameter Indicator Range Description Remarks
Gate close
threshold GateClose 0.0% - 100.0% (0.1% steps) Specifies the threshold
at which the envelope
follower gate is closed.
a) In Normal Envelope mode, the envelope follower output level is relative to the audio input level. In Inverted Enve-
lope mode, the envelope follower output level is maximized when no audio exists, and the output level declines as the
audio input level rises. In Normal Gate mode, the envelope follower output level becomes zero when the audio input
level does not reach the open threshold. The envelope follower level is maximized when the audio input level exceeds
the gate close threshold. In Inverted Gate mode, the envelope follower output level is maximized when the audio input
level does not reach the open threshold. The envelope follower level is zero when the audio input level exceeds the
gate close threshold.
STEREO DELAY FX2.0
This stereo delay enables you to create a multi-tap
delay sound using five delay taps.
Table 1.8: Stereo Delay parameters
Parameter Indicator Range Description Remarks
Master tap
delay ratio MstrTap
Ratio 0% - 200% (1% steps) Specifies delay time
ratio between each tap. For example, when you
are making a rhythm
pattern with differ-
ent tap delay settings,
adjusting this ratio
enables you to increase
or decrease the speed of
the rhythm pattern. You
do not need to adjust
each tap setting.
Master
feedback
amount MstrFbk 0% - 90% (1% steps) Specifies amount of
audio signal returned to
delay input.
Delay type Delay Type Stereo, PingPong Selects Stereo mode or
PingPong mode.
Low shelving
filter frequency LoShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) Specifies low shelving
filter frequency. This filter is applied to
feedback loops.
Low shelving
filter gain LoShelfGain –20.0 dB - 0.0 dB (0.1 dB steps) Specifies low shelving
filter gain. This filter is applied to
feedback loops.
High shelving
filter frequency HiShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) Specifies high shelving
filter frequency. This filter is applied to
feedback loops.
High shelving
filter gain HiShelfGain –20.0 dB - 0.0 dB (0.1 dB steps) Specifies high shelving
filter gain. This filter is applied to
feedback loops.
Tap 1 delay
time Tap1
DlyTime Off - 1350 ms (1 ms steps) Specifies delay time of
delay tap. With Off, no audio sig-
nal will be output from
this tap delay.
Tap 2 delay
time Tap2
DlyTime Off - 1350 ms (1 ms steps) Specifies delay time of
delay tap. With Off, no audio sig-
nal will be output from
this tap delay.