Teac DM-4800 Effect List - Manual (Page 19)

Effect parameter list
TASCAM DM-4800 Effect list
1
TC Reverb Parameters
Table 1.13: TC Reverb parameters
Parameter Indicator Range Description Remarks
Balance Settings
Initial reflection
balance I/R 50 - 0 - 50 (1 steps) Sets L/R balance of
initial reflection.
Tail balance TAIL 50 - 0 - 50 (1 steps) Sets L/R balance of
reverb tail.
High Cut Filter
Cutoff
frequency HICUT 20 Hz - 16 kHz Specifies cutoff frequen-
cy of high cut filter.
Attenuation ATT –40.0 dB - 0 dB
(0.1 dB steps) Specifies attenuation
amount of high cut
filter.
Space Editor
Room shape SHAPE HALL, HORSESHOE, PRISM, FAN, CLUB,
SMALL Specifies room shape to
simulate.
Room size SIZE 4% - 400% Specifies ratio of size of
simulated room to origi-
nal room size.
Wall diffusion W-DIFF –50% - +50%
(0.1% steps) Specifies how much
the room wall affects
sound. (A setting of 0%
simulates the original
room characteristics.)
Stereo width WIDTH 0% - 100% (1% steps) Specifies the width of
stereo image of rever-
beration. (0%: mono,
100%: stereo)
Decay
Low band decay
time LOW 0.25 s - 64.00 s Specifies decay time for
low band.
Mid band decay
time MID 0.25 s - 64.00 s Specifies decay time for
mid band.
High band
decay time HIGH 0.25 s - 64.00 s Specifies decay time for
high band.
Scaling range RANGE 4 s, 16 s, 64 s Selects decay time
range.
Crossover point X-over LOW 20 Hz - 16 kHz Specifies crossover point
between low and mid
bands.