Teac DM-4800 Effect List - Manual (Page 7)

Effect parameter list
TASCAM DM-4800 Effect list
Parameter Indicator Range Description Remarks
Low shelving
filter frequency LoShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) Specifies low shelving
filter corner frequency. This filter is applied to
feedback loops.
Low shelving
filter gain LoShelfGain –20.0 dB - 0.0 dB (0.1 dB steps) Specifies low shelving
filter gain. This filter is applied to
feedback loops.
High shelving
filter frequency HiShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) Specifies high shelving
filter corner frequency. This filter is applied to
feedback loops.
High shelving
filter gain HiShelfGain –20.0 dB - 0.0 dB (0.1 dB steps) Specifies high shelving
filter gain. This filter is applied to
feedback loops.
Wet signal
output pan Wet Pan 100%L - Center - 100%R (1% steps) Specifies pan for wet
signal output to L and R
channels.
Dry signal
output pan Dry Pan 100%L - Center - 100%R (1% steps) Specifies pan for dry
signal output to L and R
channels.
R output phase
inversion Wide Mode Off, On Determines whether
or not phase of right
channel output will be
inverted.
STEREO FLANGER FX2.0
This flanger effect features stereo-in and stereo-
out. It uses the same algorithm as the chorus effects and the parameters are identical to the stereo chorus
parameters.
Table 1.4: Stereo Flanger parameters
Parameter Indicator Range Description Remarks
L channel LFO
rate L LfoRate Freeze, 0.01 Hz - 30.00 Hz (0.01 Hz steps) Specifies LFO frequency.
L channel LFO
depth L LfoDepth 0.0% - 100.0% (0.1% steps) Specifies LFO modula-
tion depth.
L channel
pre-delay L PreDly 0 ms - 500 ms
(0 ms - 9.99 ms: 0.01 ms steps;
10 ms - 99 ms: 1 ms steps;
100 ms - 500 ms: 10 ms steps) Specifies time between
onset of original sound
onset of the effect
sound.
L channel
feedback
amount L FbkAmt 0% - 90% (1% steps) Specifies amount of
delay line output signal
returned to delay line
input.
R channel LFO
rate R LfoRate Linked, Freeze, 0.01 Hz - 30.00 Hz
(0.01 Hz steps) Specifies LFO frequency.
R channel LFO
depth R LfoDepth Linked, 0.0% - 100.0% (0.1% steps) Specifies LFO modula-
tion depth.
R channel
pre-delay R PreDly Linked, 0 ms - 500 ms
(0 ms - 9.99 ms: 0.01 ms steps;
10 ms - 99 ms: 1 ms steps;
100 ms - 500 ms: 10 ms steps) Specifies time between
onset of original sound
and onset of the effect
sound.