Teac DM-4800 Effect List - Manual (Page 4)

Effect parameter list
4
TASCAM DM-4800 Effect list
Parameter Indicator Range Description Remarks
Wet signal
output pan Wet Pan 100%L - Center - 100%R (1% steps) Specifies pan for wet
signal output to L and R
channels.
Dry signal
output pan Dry Pan 100%L - Center - 100%R (1% steps) Specifies pan for dry
signal output to L and R
channels.
R output phase
inversion Wide Mode Off, On Determines whether
or not phase of right
channel output will be
inverted.
STEREO CHORUS FX2.0
This chorus effect features stereo-in and stereo-out.
Table 1.2: Stereo Chorus parameters
Parameter Indicator Range Description Remarks
L channel LFO
rate L LfoRate Freeze, 0.01 Hz - 30.00 Hz (0.01 Hz steps) Specifies LFO frequency.
L channel LFO
depth L LfoDepth 0.0% - 100.0% (0.1% steps) Specifies LFO modula-
tion depth.
L channel
pre-delay L PreDly 0 ms - 500 ms
(0 ms - 9.99 ms: 0.01 ms steps;
10 ms - 99 ms: 1 ms steps;
100 ms - 500 ms: 10 ms steps) Specifies time between
onset of original sound
onset of the effect
sound.
L channel
feedback
amount L FbkAmt 0% - 90% (1% steps) Specifies amount of
delay line output signal
returned to delay line
input.
R channel LFO
rate R LfoRate Linked, Freeze, 0.01 Hz - 30.00 Hz
(0.01 Hz steps) Specifies LFO frequency.
R channel LFO
depth R LfoDepth Linked, 0.0% - 100.0% (0.1% steps) Specifies LFO modula-
tion depth.
R channel
pre-delay R PreDly Linked, 0 ms - 500 ms
(0 ms - 9.99 ms: 0.01 ms steps;
10 ms - 99 ms: 1 ms steps;
100 ms - 500 ms: 10 ms steps) Specifies time between
onset of original sound
and onset of the effect
sound.
R channel
feedback
amount R FbkAmt Linked, 0% - 90% (1% steps) Specifies amount of
delay line output signal
returned to delay line
input.
L channel LFO
waveform type L LfoType Off, Sine, Triangle, Sawtooth Up, Sawtooth
Down, Square Specifies LFO waveform
type.