Sundance SMT398 - Manual (Page 35)

Version 1.2.0 Page 35 of 52 SMT398 User Manual
SHBx CLK 0
Connector name:
x = A,B,C, or D
Control signal
Number corresponding to
the Byte configuration
where the control signal
belongs: 0 to 4
Figure 14: SHB constraints file control signals names.
SHBx_Dy(z)
Connector name:
x = A,B,C, or D
Data bus D for Hw:
y = 0 or 1
Z = [0:15]
Figure 15: SHB constraints file data signals names