SoundTraxx SurroundTraxx - Manual (Page 69)

SurroundTraxx User’s Guide Operations Guide Page 3:6 SurroundTraxx User’s Guide Page 3:7
you could first lock the decoder, then program SurroundTraxx.
Remember that the CV Locking feature must be enabled explicitly for each
locomotive in the Roundhouse. Once the CV Lock is enabled, you must
disable it in order to make additional changes to the locomotive settings.
Please refer to page 2:20 for more information on activating the CV Lock
feature.
SurroundTraxx CV Default List
CV # CV Description Default Value
CV 1 Primary Address 0
CV 3 Acceleration Rate 0
CV 4 Braking Rate 0
CV 11 Interpacket Timer 0
CV 12 Reserved 0
CV 15 CV Unlock Code 0
CV 16 CV Lock Code 0
CV17,18 Extended Address 0
CV 29 Configuration Byte 1 2
CV 30 Reset/Lock/Function Swap 0
CV 33 F0 (f) Output Control 1
CV 34 F0 (r) Output Control 2
CV 35 Function 1 Control 8
CV 36 Function2 Control 4
CV 37 Function 3 Control 16
CV 38 Function 4 Control 32
CV 39 Function 5 Control 8
CV 40 Function 6 Control 0
CV 41 Function 7 Control 0
CV 42 Function 8 Control 32
CV 43 Function 9 Control 0
CV 44 Function 10 Control 0
CV 45 Function 11 Control 0
CV 46 Function 12 Control 0
CV 112 Sound Configuration 1 0
CV 113 Quiet Mode Control 0
CV 114 Bell Control Register 7
CV 115 Whistle/ Airhorn Select 0
CV 116 Steam Exhaust Chuff Rate 80
CV 116 Diesel Exhaust Control 7
CV 118 Maximum Loco Speed 80
CV 119 CV Bank Select 0
CV 128 Locomotive Master Volume 255
CV 129 Whistle/ Airhorn Volume 128
CV 130 Bell Volume 64
CV 131 Exhaust Volume 128
CV 132 Air Compressor Volume 25
CV 133 Dynamo Volume (Steam Only) 28
CV 134 Blower Volume (Steam Only) 12
Operations Guide