Configuration guide, Mixer, System reset – SoundTraxx SurroundTraxx User Manual
Page 63: Purge roundhouse

SurroundTraxx User’s Guide
Configuration Guide Page 2:34
SurroundTraxx User’s Guide
Operations Guide Page 2:35
When you have finished viewing AD status, push and release the control
knob return to the AD STATUS menu.
Mixer
The MIXER option displays the state of the dynamic mixer faders for
each zone and locomotive, allowing you to observe the mixer sound level
adjustments in real time as locomotives change from zone to zone.
Turn the control knob to view the state of each sound zone (1 through 6). The
mixer fader appears as a bar graph similar to the VU meter, with the leftmost
bar corresponding to locomotive 1.
Note: When using a subwoofer it becomes channel 6.
When you have finished viewing the Mixer, push and release the control knob
return to the MIXER menu.
System Reset
When you select this option, SurroundTraxx resets all system, zone, and
audio channel settings to the factory default. The locomotive roundhouse
database is left intact.
The system prompts you to confirm the reset operation by selection either Y
(yes) or N (no).
Purge Roundhouse
Select this option to permanently delete all Roundhouse data only. The rest
of the system settings will remain intact.
The system prompts you to confirm the PURGE RH operation by selection
either Y (yes) or N (no).
To effect a complete factory reset, you must preform both the system reset
and purge operation.
Configuration Guide