Sensoray 2600 - Manual (Page 53)

2600 Family Instruction Manual 48 Chapter 8 : Model 2612 Strain Gauge/RTD Module
Command (Adrs),(Data)
Response none
Notes This function is used by the middleware to store
calibration data for the module. Refer to the
distribution media for details.
Due to the lengthy time required to write a byte to
the EEPROM, this action should be invoked only
once per command packet.
8.8 Specifications
Parameter Function
Adrs Memory address that is to be written to.
Data Byte value that is to be stored.
Table 25: Model 2612 Specifications
Analog Inputs Resolution 24 bits
Input channels 4
Conversion rate 6.875 to 3500 samples/second for each channel.
Input range ±1/2 of reference.
Input impedance 110 kOhm, minimum, measured from either sensor input to reference voltage.
Power Outputs Output channels 4
Output power 1.25V, 2V, 3V or 5V, ±10%@ 1 to 25 mA for each channel.
Mating Connectors
(*) = included with module IOM port (qty 1) RJ-45 plug, AMP 554169 or equivalent
Analog inputs (qty 4) RJ-45 plug, AMP 554169 or equivalent
Analog inputs (qty 4) (*)Pluggable TB, 8-pin, RIA 31166110 or equivalent
Temperature Operating range 0 to 70°C
Power Input power +24V ±5% @ 60mA.
Dimensions Outer dimensions 5.0H x 5.0W x 1.8D inches, including DIN mounting frame. Depth is specified with
respect to surface of DIN rail support panel; additional clearance required for field wiring.