Seaward 350 PrimeTest - Manual (Page 96)

PrimeTest 350 Operating Instructions
- 95 -
14.1.3 Test n Tag
This allows Test ‘n’ Tag labels to be produced using
the Seaward Test ‘n’ Tag thermal transfer print system.
When selected, the image that will be transferred to the
Test ‘n’ Tag label will be shown on the display.
Note: The maximum number of characters that can
be displayed in a Test ‘n’ Tag barcode is 12.
If this limit is exceeded, the barcode will not appear
on the display and will not be printed on the label.
A number of pre-configured label formats are available.
Pressing Change Format (F1) will cycle through the
available formats.
The appearance of the Test ‘n’ Tag labels can be
altered by pressing Setup (F3).