Seaward 350 PrimeTest - Manual (Page 83)

PrimeTest 350 Operating Instructions
- 82 -
If the red STOP key is pressed during a test then the
test is aborted and the abort menu appears as shown
below:
Restart Test will return to the beginning of the test that
was aborted.
Restart Appliance will return to the beginning of the test
sequence.
Abort Test will skip the test that was aborted and
proceed to the next test in the sequence.
Abort Appliance will abort the test sequence.
The first test in this sequence is a visual inspection.
The default Visual Test consists of a three-point
inspection of the appliance cord, power lead and fuse.
After performing the inspection, the appropriate
PASS/FAIL results are entered using the function keys
Pass (F3), Fail (F1) or N/A (F2). Function key Pass All
(F4) allows a PASS result to be entered for all points of
the inspection.