Seaward 350 PrimeTest User Manual

Page 36

Text mode
Original mode

PrimeTest 350 Operating

Instructions

- 35 -

arrow key to show the list of available test.

Now scroll through the list of default tests until the
required test is highlighted and press Select (F4).

Note: A unique feature of the PrimeTest 350 is the

ability to create User defined tests. For full
details of this feature refer to section 9.1.5

If the selected test has user definable parameters the
Edit New Test window will open e.g. if an Insulation
test is selected the window below will open.

The required parameters can be chosen by selecting
the appropriate field and entering the required value
using the keypad.

Note: A decimal point is entered by pressing the F1

key.