Seaward 350 PrimeTest User Manual

Page 87

Text mode
Original mode

PrimeTest 350 Operating

Instructions

- 86 -

Note: In order to perform an Insulation Resistance

measurement correctly, the EUT mains
switch must be in the ON position. If the EUT
mains switch is OFF, only the insulation of
the power cord will be tested, as the test
voltage cannot be applied beyond the mains
switch.

When satisfied that the EUT mains switch is in the ON
position, press the START key to proceed. The display
will now progress to the measurement screen as
shown below.

Note: In Expert Mode the test will begin with the on

screen prompt and START key press.