Seaward 350 PrimeTest - Manual (Page 90)

PrimeTest 350 Operating Instructions
- 89 -
The Test Type field indicates whether the sequence
was a visual inspection only or measured values were
recorded during the test sequence. Test sequences
that do not involve the recording of measured values
have the Test Type is set to Visual.
13.7 Options
Pressing Options (F3) offers a list of post-test options
as shown below.
This allows the user to view the results of each test in
the sequence, view information about the EUT, print a
test label, print the test results, or write the results to an
RFID tag.