Seaward 350 PrimeTest - Manual (Page 47)

PrimeTest 350 Operating Instructions
- 46 -
10.2 Preferences
There are a number of general features within the
PrimeTest 350 that can be setup/customized for
individual users
Press Menu (F4). Use the arrow keys to highlight and
select User Options followed by Preferences. Press
OK (F4).
The first field shows the User Name. Any changes
made to these preferences will be stored against this
User only. Use the up/down arrow keys to highlight the
desired feature. Once the preferences have been
setup press OK (F4) to store the changes. Esc (F2)
will exit this screen without saving the changes.
10.2.1 Display Time
This feature allows the time to be displayed on the
LCD. Use the left/right arrow keys to adjust.
10.2.2 Set Contrast
This feature allows the contrast of the display to be set.
Use the left/right arrow keys to adjust.
10.2.3 Auto Off Time (mins)
The PrimeTest 350 will power itself off after a period of
inactivity. This time is set here. Use the left/right arrow
keys to adjust the value between 0 minute and 10
minutes. (0 means that it will never power itself off)
10.2.4 Data Entry
In Automatic mode it is required that an asset id
number be entered prior to starting a test. This can be
done either by using the keypad only, using the keypad
and a barcode scanner or using the keypad and an
RFID wand. Use the left/right arrow keys to set. The