Seaward 350 PrimeTest - Manual (Page 28)

PrimeTest 350 Operating Instructions
- 27 -
When the data has all been transferred, click on
Capture -> Stop Capture.
You now have the configuration data stored on your
PC in a format that can be edited using a standard text
editor such as Windows Notepad
The configuration data can be modified to add new
Sites, Locations, Users or Comment information and
sent back to the PrimeTest 350.
6.3.2 Receive Config Data
Follow the steps above in Send Config Data to run
DataTransfer.exe and connect the PrimeTest 350 to
your PC.
Click on File on the DataTransfer.exe menu and select
Send File. This will open a window allowing you to
select the text file containing your Site, Location, User
and Comments configuration data. Select the require
file and click on Open. The DataTransfer.exe
application will now transfer the configuration file to the
PrimeTest 350.
When the transfer is complete the PrimeTest 350
screen will display a message as shown below.
If the transfer is not successful, check that the format of
the configuration file exactly matches that specified.
Note: The Config file must be ASCII text and the
last entry must be the [END] statement.