RLE LD1500 V.3.1 - Manual (Page 24)

24 LD1500 User Guide 800.518.1519
4 Web Interface
Figure 4.2 LD1500 Home Page
Field Description
Alarm Status If the controller is in an alarm state, details regarding the alarm are
noted in this field. The field is color coded to indicate the type of
alarm.
sysUp Time The amount of time that has passed since the system was last
reset or powered on.
Cable Length The length of cable connected to the controller, as calculated by the
LD1500.
Cable Current The amount of current running on the sensing cable.
Leg 1 Resistance The resistance of Leg 1 is displayed in Ohms.
Leg 2 Resistance The resistance of Leg 2 is displayed in Ohms.
Leak Alarm Count The number of leak alarms detected by the system since it was last
reset.
Contamination
Alarm Count
The number of leak alarms detected by the system since it was last
reset.
Remeasure Count When a leak is detected, remeasure indicates how many seconds
remain before the distance to the leak is measured again.
Firmware The firmware version currently running on the system.
Bootloader The bootloader version currently running on the system.
Bottom Row Statistics The main page of the web interface loads once, and then the data
in the fields is refreshed on a regular basis. Because of the way the
page loads, you will not see the entire page flash to blank and
reload completely, but the data will be refreshed. Because the page
refresh may be hard to detect, the bottom of the page features
statistics that let you know the data you’re viewing is up to date
Page loaded at: The date and time the information on this page first
loaded
Refresh: The number of times the data within the fields has been
refreshed. This number increases as the LD1500 is pinged for new
data.
Timeout: The opposite of Refresh. If the LD1500 goes down while
this page is viewed, the timeout field will track how long
communications are interrupted.