RLE LD1500 V.3.1 - Manual (Page 12)

12 LD1500 User Guide 800.518.1519
1 Product Overview
1.3. Mechanical Description
The LD1500 is built with one circuit board. The main board is mounted inside of the
enclosure.
1.4. Installation
The LD1500 is a wall mounted device. Before applying power to the unit, ensure that all
connections are correct and all screw terminals are secure. The LD1500 is powered by 24
VAC or 24 VDC power. DO NOT connect 115/230 VAC to the unit; damage will occur to the
circuitry.
1.5. Reference Map
Users are advised to purchase a framed reference map (FM1114) for use with the LD1500 to
aid in locating any detected leaks along the sensing cable. Once all the sensing cable is
installed, compare this reference map with the actual cable installation. Note any discrepancies
and return the map to the original author for correction. Keep a copy for use until the map is
revised.
1.6. Web Interface
The LD1500's web page interface provides remote information updates via network
communications.
A more detailed description of the web page interface can be found in Chapter 4, “Web
Interface” on page 23.