RLE 10K V.2.5.a - Manual (Page 23)

rletech.com SeaHawk 10K User Guide 23
2 Installation and Configuration
♦ Wet a paper towel or rag and wrap it loosely around the cable. This is popular if the cable
is used in pipe applications. Be careful to wrap the wet cloth loosely around the cable. Do
not put pressure on the cable.
IMPORTANT To avoid inaccurate readings, do not grip the cable with your hand.
3 Verify that the SeaHawk 10K reports the leaks within approximately two feet of their actual
physical location.
4 Remove all simulated leak sources and return the system to its normal operating state.